Retail Site Selection: Public Data and Parcel Checks
Retail site selection from trade area to parcel. Use public data to check traffic, drive-through zoning, recorded restrictions, curb cuts and flood zones.
Retail site selection is choosing a store or retail development location by narrowing from a market to a trade area to one site. Teams compare nearby residents, workers, traffic, competition, co-tenants, visibility and access. Then they check whether the land and zoning allow the use at a cost that expected sales can support.
By Pillar, a land research software company. Sources read November 22, 2026; verify current text before relying on a rule. General information, not legal advice; confirm zoning, title and access rules with a licensed professional in your state.
How retail site selection works
Teams narrow candidates in three steps:
- Market selection. Pick metros or submarkets where growth, logistics and store targets justify opening, checking cannibalization.
- Trade area analysis. Define the catchment and evaluate residents, workers, traffic, co-tenants and competitors.
- Site evaluation. Compare parcels on frontage, visibility, access, parking, zoning, covenants, utilities and occupancy or build cost.
Commercial location datasets estimate visits, dwell time and origins; public records handle trade-area and legal checks.
Retail site selection with free public data
None of these sources measures store visits.
- Population, households, income and age (Census ACS). Pull tables on data.census.gov (estimate guidance): 1-year (12-month) estimates cover 65,000+ residents, 1-year Supplemental 20,000+, and 5-year (60-month) all areas including tracts. Values are sample estimates with margins of error (MOE). Comparison guidance advises comparing like periods (non-overlapping 5-year), checking variable/geography changes and excluding 2020 1-year experimental estimates. For population totals, use the 2020 Census or Population Estimates Program where available for your geography; use ACS for characteristics (medians, percents, rates). Test differences with the statistical testing tool (ACS guide).
- Daytime workers (Census OnTheMap). Query workplace jobs and commutes in OnTheMap (LODES, 2020 blocks). LODES 8.5 (rev. October 19, 2026) covers 2002–2024 for most jurisdictions; 49 of 51 partners (48 states plus DC) have 2022–2024 Origin-Destination and Workplace Area Characteristics files (missing Alaska, Michigan; Puerto Rico excluded). Per Federal Employment in LODES/OnTheMap, All Jobs measures beginning-of-quarter (Q2) UI-covered jobs plus OPM federal civilian jobs (2010 onward); private-only series exclude federal jobs. Counts exclude military, self-employed, informal workers, other worker classes and some federal agencies (partial list: USPS, Federal Reserve Board of Governors, Judicial Branch). Per LEHD, modeled counts lack sampling-error measures and face nonsampling errors (misreporting, late reporters, imputations); they track covered jobs by block, not store visits (OnTheMap guide).
- Traffic counts (state DOT AADT). FHWA's glossary defines Annual Average Daily Traffic (AADT) as annual vehicle volume divided by 365. TxDOT's Traffic Count Maps publish an annual map, GIS files and STARS II (daily, hourly, directional, classification, historical) from 75,000+ annual short-term counts and 350+ continuous 24/7 stations. FHWA methodologies note continuous classification counters yield higher-quality data than short counts, which need volume adjustment factors. Check count year and direction (AADT guide).
- Parcel, owner, acreage and zoning (county and city records). Assessors publish tax records; planning holds zoning maps. Sacramento County's parcel maps FAQ notes maps show parcel numbers, lot lines, recorded dimensions, addresses and acreage (generally half an acre or more; the county assesses only usable acreage, which can differ from the deed). Maps are for assessment only, are not surveys, do not establish legal lot status or maintain easements or updated zoning (directing owners to local planning), and may show a postal city differing from legal jurisdiction. Assessor-map changes take up to 4 weeks to reach County GIS; post-recording processing varies, and the assessor does not create new assessor parcels in May or June. Check ownership records separately.
- Flood zones (FEMA). Check the FEMA Flood Map Service Center, "the official public source for flood hazard information produced in support of the National Flood Insurance Program (NFIP)," for effective, preliminary and historic products. Maps update continually and downloaded effective panels may be superseded.
Retail site selection criteria: the parcel checklist
Check five records before making an offer.
1. Zoning district, use permissions and drive-through rules
Confirm zoning, overlays, conditions and whether retail and drive-throughs are permitted, limited, conditional or barred (commercial zoning; conditional use permits). Two codes illustrate:
Spokane, Washington (Spokane Municipal Code). In SMC 17C.120.100 (Table 17C.120.100-1, eff. March 2, 2026), Retail Sales and Service (stores and restaurants, 17C.190.270) is P in NR, CB and GC (allowed if complying with chapter standards), N in O, L[7] in NMU (17C.120.280) and L/CU[6] in OR (17C.120.110, eff. June 10, 2026). Drive-through Facility is P in CB and GC and L[4] in NR, NMU, O and OR. Under 17C.120.290 and 17C.120.110, NR and NMU allow drive-throughs on sites adjacent to a principal arterial street, with ingress and egress from the principal arterial and prohibited from a local access street. In O and OR, drive-throughs are permitted only with a drive-through bank (at most two lanes, on a site adjacent to a principal arterial, with entry and exit from that arterial only), plus in OR only, accessory drive-through sales of non-alcoholic drinks and off-site-prepared food for a special-permit florist on a principal arterial or designated state route. Downtown, 17C.124.290 bars drive-throughs not contained within a structure along Type I or II complete streets in DTC, DTG and DTU.
SMC 17C.325.020 states "Drive-through facilities are not a right" and applies Chapter 17C.325 only to drive-through portions of site development (new, added or relocated). It governs setbacks (17C.325.030), intersection spacing (17C.325.040), Chapter 17C.220 off-site impacts (17C.325.060) and stacking (17C.325.050). Primary drive-through facilities need at least 80 ft in each stacking lane. Gas pumps need at least 30 ft of stacking lane from a lot line to the nearest pump, and applicants must show engineering services that queues stay clear of adjacent street traffic. Accessory facilities without routine queues need no stacking lane.
Albuquerque, New Mexico (Integrated Development Ordinance, eff. May 2026). Table 4-2-1 lists "Drive-through or drive-up facility" as Permissive Accessory (A — compatible with a Permissive or Conditional Primary use on the lot and subject to Use-specific Standards, § 14-16-4-1(C)(3)) in MX-L, MX-M, NR-C, NR-BP and NR-LM, Conditional Accessory (CA — requiring Conditional Use Approval under § 14-16-6-6(A) and compliance with listed Use-specific Standards, § 14-16-4-1(C)(4)) in MX-H, and blank (not allowed) in MX-T, NR-GM, NR-PO and all residential zones. Section 14-16-4-3(F)(5) bars it accessory to cannabis retail ((c)) or adjacent to Major Public Open Space ((e)), requires Conditional Use Approval within 330 ft of Major Public Open Space where otherwise eligible ((d)), prohibits or limits it in 10 mapped small areas as noted ((f)), and requires compliance with § 14-16-5-5 (Parking and Loading) and § 14-16-5-9 (Neighborhood Edges) ((b)). Under (a), cap order boards at 50 sq ft per stacking lane, faced away from public streets as far as practicable; if impracticable, plant at least 2 evergreen trees in the required buffer where they best screen them from the public right-of-way. Under § 14-16-5-5(I)(1) and Table 5-5-9, minimum stacking spaces per establishment (20 ft each unless modified in the DPM or by the City Engineer, measured from queuing-lane end or property line) are 12 for restaurants (6 in UC-MS) to the pick-up window and 4 for retail or banks/ATMs (3 in UC-MS) to the pick-up or teller/ATM window (plus fueling and car-wash minimums). See § 14-16-5-5(I)(2) for lane screening, bans on electronic devices audible past the property line, 50-ft window/order-board separation from abutting Residential zones or mixed-use residential lots, edge buffering and UC-MS-PT/MX-H lane placement.
2. Legal lot status
If a deed cites a recorded plat, pull it, replats and amendments from land records for dimensions, dedications, building lines and easements the plat created (how to read a plat map). Check title records separately for later easements. Assessor maps are for taxation—Sacramento County's FAQ notes its parcels are "Not necessarily" legal parcels and directs owners to local planning—so confirm legal lot status and platting with planning before splitting a pad.
3. Shopping center REAs, covenants and exclusives
Order a title commitment, inspect Schedule B and pull every listed recorded REA, declaration and amendment (deed restrictions). Cox, Castle & Nicholson (Fall 2013), illustrating a two-party developer–retailer REA, notes the REA's obligations run with the land and bind later owners, and that it typically covers non-exclusive parking and access easements, utility tie-ins, architectural compatibility review, pro rata common-area billing and amendment consent (usually developer and major retailer); some REAs also restrict uses on the developer's property for the major retailer's benefit. Lippes Mathias LLP (November 17, 2026), writing for sellers, adds that tenant exclusives, anchor sightlines, building envelopes and anchor consent rights can burden a sold outparcel (outparcel and pad site guide).
4. Driveway permits, curb cuts and corner clearance
Frontage does not guarantee a curb cut (road frontage vs. legal access).
In Texas, under 43 Tex. Admin. Code § 11.52 (eff. February 19, 2020), a permit is required before building a state-highway access connection or making a material change to the permittee's property use, the connection's traffic volume, or the types of vehicles using it if the change triggers stricter standards than apply to the existing approved connection ((a)). Confirm whether TxDOT, a municipality or an eligible county with delegated authority issues the permit. Under (g), remodeling, or demolishing and rebuilding, a business structure or improvement on a permittee's property requires neither a new permit nor stricter standards than apply to the approved connection, unless the district engineer finds in writing, with reasons, that it will significantly impact traffic patterns so the existing connection location threatens public safety. Where TxDOT permits, Access Management Manual Ch. 2, Sec. 4 requires the owner or authorized representative (representing all interested parties) to file Form 1058 solely to secure or change access, hold an executed permit, give 24-hour notice before right-of-way work and pass final inspection for authorization. Where a local agency permits, TxDOT must approve state-highway drainage impacts first.
For "other state system highways" (excluding new-alignment highways, freeway mainlanes, frontage roads, and rural highways outside MPO boundaries with ADT below 2,000 and little if any development potential), Ch. 2, Sec. 3, Table 2-2 sets minimum level-grade passenger-car spacing and corner clearance at 200 ft (30 mph or less), 250 (35), 305 (40), 360 (45) and 425 (50+). Distances may be adjusted for downgrades or significant truck traffic. Where present or projected traffic operations indicate a specific need, the permitting authority may consider intersection sight-distance or gap-acceptance adjustments. Where unattainable, the authority may allow lesser spacing with shared abutting access, or—if no alternative exists—a connection along the property line farthest from the intersection, considering right-in-only or right-in/right-out-only design if feasible. Where TxDOT handles spacing variances, Ch. 2, Sec. 5 states potential land-locking from subdividing and selling lots to separate owners "will not alone justify a variance" if the original tract already has a permitted connection or qualifies for one under the spacing rules, recommending internal access easements. For platted access points on undeveloped property, § 11.52(f) applies recording-date standards if, before the fifth anniversary of proper plat or replat recording, development starts on the tract the permit would serve and the application for the platted location is submitted to TxDOT. Later material highway design changes near the points must have no significant impact on traffic patterns that makes the points a public safety threat. Otherwise, submission-date standards apply.
5. Flood zone
Check FEMA's Flood Map Service Center and record Special Flood Hazard Area overlap and panel status (effective vs. preliminary) before pricing grading or insurance.
Worked example: screening a hypothetical Spokane corner site
Take a hypothetical 0.75- to 1.25-acre Spokane NR corner lot with 150 to 200 ft of principal-arterial frontage (20,000 to 25,000 AADT, illustrative, not a threshold), local-access-street side frontage and rear Residential zoning, for a single-lane restaurant drive-through. Illustrative only, not a real parcel or city determination.
- Use and access: SMC 17C.190.270 lists restaurants under Retail Sales and Service, marked
PinNRin Table 17C.120.100-1 (allowed if complying with chapter standards). Under 17C.120.290, this lot meetsNR's principal-arterial adjacency condition (L[4]), provided ingress and egress use only the principal arterial and never the local street. Chapter 17C.325 still applies, and "Drive-through facilities are not a right" (17C.325.020). - Corner clearance: 17C.325.040 spaces entrances at least 125 ft along the property line from the street lot-line junction to the nearest entrance edge, unless otherwise authorized by the director of engineering services. On 150 to 200 ft of frontage, our arithmetic leaves 25 to 75 ft; the full entrance width must fit there.
- Stacking, setbacks and noise: Fit at least 80 ft of clearly identified stacking (non-linear allowed) from curb cut to outdoor order area—or service window if none precedes it—without interfering with parking, parking access or circulation (17C.325.050). Set service areas and stacking lanes 5 ft back from street lot lines and lines abutting Residential, Commercial or Industrial zones. Landscape those setbacks to at least
L2along street and Residential lines and at leastL3along Commercial or Industrial lines (17C.325.030). Meet Chapter 17C.220 off-site impact standards, and if using noise-generating equipment like an order speaker, document noise compliance in advance because the rear abuts Residential zoning (17C.325.060). - Records: Pull the recorded plat and amendments, Schedule B and every listed exception (REAs, covenants, easements), driveway permit rules and the current FEMA flood panel.
Turning criteria into a parcel shortlist
After trade-area screening, teams find frontage parcels near anchors matching size and zoning, eliminate access, flood and covenant blockers, and pull recorded owners (how to find out who owns a property).
For that screen, Pillar for retail shows a parcel's available zoning facts, acreage, mapped FEMA flood zones and National Wetlands Inventory over parcel boundaries (Pro and active Pro trials add zoning and infrastructure layers where covered). Coverage varies by dataset; confirm use rules, covenants and driveway permits locally.
Quick answers
What is retail site selection? Choosing a store or retail development location in three steps: market selection, trade area analysis, and parcel evaluation across access, zoning, covenants, utilities and occupancy or build cost.
Which free public sources cover demographics, workers and traffic counts? Census ACS (sample estimates with margins of error), Census OnTheMap (modeled covered jobs) and state DOT AADT portals (like TxDOT STARS II); none measures store visits.
What should you check in a shopping center's recorded REA? Pull every Schedule B REA, declaration and amendment for non-exclusive parking and access easements, utility tie-ins, architectural compatibility review, pro rata common-area billing, amendment consent and any use restrictions.
Does commercial zoning automatically allow a drive-through?
No. In Spokane, NR and NMU require a site adjacent to a principal arterial, with entry and exit from that arterial only. O and OR limit drive-throughs to qualifying banks, with a separate special-permit florist exception in OR. DTC, DTG and DTU bar facilities not contained within a structure on Type I or II complete streets. Albuquerque lists them as Conditional Accessory (requiring Conditional Use Approval under § 14-16-6-6(A) and compliance with listed Use-specific Standards, § 14-16-4-1(C)(4)) in MX-H, excludes them in MX-T, requires Conditional Use Approval within 330 ft of Major Public Open Space where eligible, bars them adjacent to it, and bars or limits them in 10 mapped small areas as noted.
Does road frontage guarantee a retail curb cut? No. On Texas state highways covered by TxDOT Table 2-2, minimum level-grade passenger-car spacing and corner clearance run 200 ft (≤30 mph) to 425 ft (50+ mph), subject to adjustments, shared-access exceptions or variances. Where TxDOT handles spacing variances, potential land-locking from subdividing and selling lots to separate owners "will not alone justify a variance" if the original tract already has a permitted connection or qualifies for one under the spacing rules.