Raw Land: What It Means, Loans and a Buying Checklist

Raw land is land with no buildings, utilities or roads. See how regulators and lenders define it, how raw land loans work and what to check before buying.

Pillar team12 min read

Raw land is land in its natural state: no buildings, no utilities, no roads or other improvements, and usually no grading or development approvals. It is real estate at its earliest stage. Before anyone builds on it, someone has to confirm legal access, water, sewage disposal, zoning and soils, and pay to bring services to the site.

Pillar, a land research software company, wrote this guide. Each rule links to its published source, read on November 19, 2026. This is general information, not legal, lending or tax advice. Confirm your purchase with an attorney, a lender and a tax professional licensed in your state.

What is raw land?

"Raw land" is a trade term. We found no federal statute or regulation that defines it. Official sources use it, or a close relative, in two ways.

  • Bank regulators list it as a loan category. The Interagency Guidelines for Real Estate Lending Policies (12 CFR Part 365, Appendix A) set a loan-to-value limit for "Raw land" without defining it. They define a land development loan as credit "for the purpose of improving unimproved real property prior to the erection of structures," an improvement that "may include the laying or placement of sewers, water pipes, utility cables, streets, and other infrastructure necessary for future development." As we read it, raw land is land before that work.
  • Tax rules say "unimproved and unproductive." Treasury Regulation 1.266-1 has a rule for "unimproved and unproductive real property." In its first example, a property "is vacant and unproductive" one year and is operated "as a parking lot" the next, and only the first year qualifies.

Raw land vs vacant land vs unimproved land vs improved land

Listings use these words loosely, and the guides that rank for them disagree. Treat each label as a claim to verify.

  • Raw land, or undeveloped land. Nothing has been done to it: no structure, utility service, road or grading.
  • Unimproved land. The guidelines above use "unimproved real property" for land before that infrastructure. The Texas Real Estate Commission's Unimproved Property Contract (Form 9-18, effective July 1, 2026) "is for property that does not have physical buildings, additions or fixtures on the land." The commission adds that the form "is generally used for property that has been platted (has a recorded Lot/Block legal description)" and "is not for use for condominium transactions." Landmodo, a land marketplace, uses "unimproved" for a parcel with some amenities that still needs work before building.
  • Vacant land. Land with no building on it, whether or not utilities reach it. Fannie Mae's Selling Guide uses the term: Fannie Mae does not purchase or securitize mortgages on "vacant land or land development properties" (B2-3-01, dated September 3, 2025), so a lender cannot sell it a mortgage on vacant land.
  • Improved land. In everyday use, land with some services. First South Farm Credit says improved land "has some infrastructure in place. It might have access to water, electricity, or a driveway." The lending guidelines use the word differently. Their improved property category includes "Farmland, ranchland or timberland committed to ongoing management and agricultural production." As we read it, a bank can treat cropland in production, with no building on it, as improved property.

Before you rely on a label, ask what is physically there: road, power, water, sewer or septic approval, and a survey.

Raw land loans: why raw land is harder to finance

Regulators and lenders each say why.

Bank regulators set their lowest loan-to-value limit for raw land. The guidelines are published for FDIC-supervised institutions in Part 365, for national banks in Part 34 and for state member banks in Part 208. They say institutions "should establish their own internal loan-to-value limits for real estate loans," which "should not exceed" supervisory limits that include:

  • Raw land: 65 percent
  • Land development: 75 percent
  • Construction: 80 percent for commercial, multifamily and other nonresidential property, and 85 percent for 1- to 4-family residential property
  • Improved property: 85 percent

A supervisory limit is guidance for a bank's own written lending policy. It is not a promise that a bank will lend 65 percent or a down payment set by law, and a bank may set a lower limit. For a loan that funds several phases of one project, the guidelines apply "the limit applicable to the final phase of the project funded by the loan," and "loan disbursements should not exceed actual development or construction outlays." Ask the lender which category your loan falls in.

The guidelines allow individual above-limit loans supported by other credit factors. Such loans should be identified in bank records and their aggregate reported to the board at least quarterly. For loans outside internal policy standards, approval should have written justification of all relevant credit factors, retained with approval documents in the permanent loan file. Exception loans of significant size should be reported individually to the board. Above-limit loan totals should not exceed 100 percent of total capital, with a 30 percent sublimit for commercial, agricultural, multifamily and other non-1-to-4-family residential properties. These caps concern above-limit loan totals, not individual loans.

Examiners are told why. The OCC's examiner handbook, Commercial Real Estate Lending (version 2.0, March 2022), says "Land acquisition loans finance the acquisition of undeveloped land." Those made "for speculative purposes without plans to immediately develop the property" "are among the riskiest types of CRE loans" (CRE is commercial real estate). It adds: "Undeveloped land generates no cash flow in most cases and requires other sources of funds to service the debt."

Lenders say the same. First South Farm Credit, a cooperative in the Farm Credit System, says on the page linked above (dated July 25, 2025): "From a financing perspective, raw land is often considered riskier. That means lenders may require a larger down payment or offer shorter loan terms." Its page gives no figures, and neither do we. Ask each lender for its down payment, rate, term and any balloon payment.

Two other routes:

  • USDA farm loans. The Farm Service Agency's Farm Ownership Loans support "farmers and ranchers aiming to purchase, develop, or expand their agricultural operations." Applicants "must be U.S. citizens or permanent residents, have sufficient education, training, or experience in managing a farm, and demonstrate an ability to repay the loan," and requirements vary by loan type.
  • Seller financing. A seller may take payments instead of a bank. Our land contract guide covers how those deals work and what happens on default.

Raw land checklist: what to check before buying raw land

With no house to inspect, the work is in the land and its records. Each item says what to look up, where, and what a bad answer means.

  1. Legal access. Look for a recorded right to reach a public road in the deeds, plats and easements at the county recorder, and ask the road agency who maintains the road. Touching a road does not prove a right to use it (road frontage vs. legal access). A landlocked parcel needs an easement from a neighbor or a court (easement by necessity), and Fannie Mae also excludes "properties that are not readily accessible by roads that meet local standards."
  2. Water, and sewer or a septic site. Ask each provider in writing whether it will serve the parcel (will-serve letter). Where there is no sewer, the permit is local: the EPA says it "does not regulate single family home septic systems" and that in most states local health departments issue the permits under state law. A site that fails may need a costlier alternative system, or may not be approved; see the perc test and septic vs sewer guides.
  3. Flood zone. Find the parcel at FEMA's Flood Map Service Center. FEMA defines the Special Flood Hazard Area as "the area where the National Flood Insurance Program's (NFIP's) floodplain management regulations must be enforced and the area where the mandatory purchase of flood insurance applies." Measure how much of the parcel is inside it before you count buildable acres (flood zone X guide).
  4. Wetlands. Start with the U.S. Fish and Wildlife Service's Wetlands Mapper. The agency says its data "should not be interpreted as representing the presence, absence, or extent of wetlands that may be covered under one or more federal, state, Tribal, or local laws." A bad answer can mean a federal permit: the EPA says Section 404 of the Clean Water Act "requires a permit before dredged or fill material may be discharged into waters of the United States, unless the activity is exempt from Section 404 regulation." A wetland delineation marks the boundary in the field.
  5. Zoning and allowed use. Find the parcel on the city or county zoning map, then read the district's permitted uses, minimum lot size and setbacks in the current code. If your use is not allowed, you need a rezoning or another approval first. A future land use map is policy, not zoning (zoning vs. future land use), and one label varies widely between cities (R1 zoning).
  6. Boundaries and acreage. The recorded deed and plat give the legal description, and a boundary survey locates it on the ground. Until then, treat a county map's outline and acreage as estimates (deeded acres vs. GIS acres). A bad answer is fewer acres than the price assumed, or a neighbor's fence or driveway across the line.
  7. Title, easements and restrictions. A title commitment lists what the policy will not cover, including recorded easements and deed restrictions. Read each exception document. A private restriction can bar a use the zoning allows.
  8. Mineral rights. Check the chain of deeds at the county recorder for an earlier owner who kept the minerals (mineral rights guide). The Bureau of Land Management says that when surface and subsurface rights "are owned by different parties, the mineral rights often take precedence over other rights."
  9. Soils and slope. Look up the parcel in NRCS's Web Soil Survey. NRCS says soil surveys "can help you evaluate the suitability of a tract of land for its intended use before buying or selling," and lists slope among the properties they describe. Use the survey to decide what to test on site (soil survey guide).

What does it cost to make raw land buildable?

No national figure holds, because every item depends on the site and the county. Get a local price for each:

  • A boundary survey
  • A soil evaluation or perc test
  • A driveway and its permit
  • Power, and either water and sewer extensions or a well and a septic system
  • Clearing and grading
  • Building permits and any impact or connection fees

For published prices with their sources, see our guides to land survey cost and mound septic systems.

Taxes while you hold raw land

Raw land usually earns nothing while you hold it, and the property tax bill still comes. The IRS says "Deductible real property taxes are generally any state or local taxes on real property levied for the general public welfare," and "The charge must be uniform against all real property in the jurisdiction at a like rate." An individual's itemized deduction is "subject to limitations," so do not assume every assessment or service charge on the bill qualifies (Topic no. 503, last reviewed or updated November 9, 2026).

There is also an election. Under 26 U.S.C. 266 and Treasury Regulation 1.266-1, the owner of "unimproved and unproductive real property" may elect to capitalize "Annual taxes, interest on a mortgage, and other carrying charges" instead of deducting them. The conditions:

  • Only an item that is "otherwise expressly deductible" can be capitalized, and "No deduction is allowable for any items so treated." The amount is added to the property's basis.
  • For these items, the election "is effective only for the year for which it is made." It is made in a statement filed "with the original return" for that year.
  • Separate interest capitalization rules, sections 1.263A-8 through 1.263A-15, apply first.

Whether to elect depends on your return, so ask a tax professional.

Is raw land a good investment?

That depends on the parcel and the plan, and this guide makes no return claim. Raw land usually produces no income while it is held, and the owner pays property tax, plus interest if there is a loan. Its value rests on what can legally and physically be built or grown there, which is what the checklist tests.

How developers screen raw land before paying for studies

A homebuilder or developer runs the same checklist in an order that lets a free check end the deal before a paid one starts.

  1. At the desk. Zoning first, then access, flood zone and mapped wetlands, soils and slope, and last the deed, plat and recorded easements. Record mapped flood and wetland overlap as screening observations, with the source and date. Keep gross acreage separate: overlays alone do not establish usable or buildable acreage. Our desktop site screening checklist has the full list.
  2. By phone or letter. The planning office, the road agency, the health department and each utility.
  3. Under contract, inside a due diligence period. The title commitment, the boundary survey, the soil evaluation, and a wetland review or delineation where mapping, soils, topography or other site evidence calls for it. See the land feasibility study guide for the paid studies, how to buy land for contingencies and the land acquisition process for the stages around them.

The deal documents rarely say "raw." The deed gives the legal description, the title commitment lists easements and restrictions as exceptions, and the survey shows what is on the ground.

Pillar's map layers draw FEMA flood hazard zones and the National Wetlands Inventory over parcel boundaries. Coverage varies by dataset, and the zoning and infrastructure layers need a paid plan.

Quick answers

What is raw land? Land in its natural state, with no buildings, utilities, roads or other improvements. It is a trade term, and we found no federal definition.

What is the difference between raw land and vacant land? Raw land has had nothing done to it. Vacant land has no building but may have utilities or a road. Listings mix the two.

What should I check before buying raw land? Legal access, water and sewer or septic, flood zone, wetlands, zoning, boundaries, title, mineral rights and soils.

Can you get a loan for raw land? Yes, from lenders that make land loans. The federal bank guidelines list a 65 percent supervisory loan-to-value limit for raw land, with a different rule for loans that fund several project phases and with exceptions allowed. That figure is not a loan offer or a required down payment.

Can you build on raw land? Only if the zoning allows the use and the parcel can get legal access, water, sewer or a septic permit, and a building permit.