Industrial Outdoor Storage (IOS) and Zoning
Industrial outdoor storage (IOS) is yard land for trucks, trailers and equipment. How to check a parcel's zoning for it, with examples from four cities.
Industrial outdoor storage (IOS) is industrial land used mainly to park or store trucks, trailers, containers, equipment or materials in the open, with a small building or none. The usable yard is central to how it operates and leases. Investment manager Hamilton Lane describes typical sites as 2 to 10 acres, often with a floor area ratio under 20%.
Pillar wrote this guide from sources read November 20, 2026. This is general information, not legal advice; confirm the use with the planning department and a licensed land use attorney.
What is industrial outdoor storage?
"IOS real estate," "IOS property" and "IOS yard" mean the same asset. In June 2023, Hamilton Lane said IOS rents were usually quoted per acre per month and cap rates typically ran 100 to 250 basis points above traditional industrial assets. In August 2025, Northmarq estimated that major investment groups targeting IOS portfolios typically pay 100 to 150 basis points over standard industrial cap rates, depending on location and market characteristics.
What zoning allows outdoor storage? How four cities regulate yards
Chicago, Illinois (M1, M2, M3)
The use table in Sec. 17-5-0207 classifies these uses. P means permitted by right, subject to the code's other standards; S needs special use approval; a dash or an unlisted use is prohibited (Secs. 17-5-0202 to 17-5-0204).
- Contractor/Construction Storage Yard: prohibited in M1; P in M2 and M3.
- Vehicle Storage and Towing: P in M1, M2 and M3. The definition lists "fleet storage yards."
- Container Storage: S in M2 and M3, subject to Sec. 17-9-0105: storage areas at least 20 feet from a lot line adjacent to a residential district and 7 feet from one adjacent to a public way, plus fence, landscaping and stacking rules.
- Freight Terminal: P in M2 and M3. Outdoor Storage of Raw Materials as a Principal Use: P in M3 only.
Under Sec. 17-5-0501, outdoor storage "is allowed as a principal use in the M2 and M3 districts, but not in the M1 district"; customary accessory storage is allowed in any M district but must be paved in M1. Sec. 17-5-0601 requires screening from public streets except alleys and from R districts along side or rear lot lines, including across an alley. Confirm this before treating the M1 vehicle-storage entry as approval for an open yard.
Container storage, freight terminals and principal-use raw-material storage also need planned development review at 10 or more contiguous acres of net site area or within 660 feet of an R, B, C or POS district (Sec. 17-9-0117-A). New uses, and existing ones that change or increase their area, bulk or function, need site plan review under subsection G: a traffic study and air quality evaluation submitted for city review, then a ward meeting at least two weeks before filing. See G for notice, landscaping and lighting.
Watch the use name: "truck staging or storage areas" are typical Warehousing, Wholesaling and Freight Movement uses (Sec. 17-17-0105-E), whose storage and work areas "must be conducted within completely enclosed buildings or structures," with planned development review at 10 or more contiguous acres of net site area (Sec. 17-9-0117-F). Ask the Zoning Administrator which category your truck yard falls in.
Dallas, Texas (CS, LI, IR, IM)
- Outside storage (Sec. 51A-4.213(9)) covers items placed outdoors or in open or partly enclosed structures for over 24 hours. By right in CS and industrial districts with RAR (below). Central area districts require a specific use permit (SUP). Items must be customarily used or stored outdoors or made of weather-resistant material. Above 5% of the lot, storage is generally a separate main use. Screen in CS, LI and IR. In IM, screen sides within 200 feet of and visible from a thoroughfare, expressway, new expressway or non-IM property across the street or sharing a lot line. Stacking is capped at 30 feet where visible from and within 200 feet of a thoroughfare or adjoining non-IM property. Within 40 feet of required screening, stacks cannot exceed its height. (D)–(E) cover loading and buffers. Keep storage out of required yards, landscaping and parking areas.
- Contractor's maintenance yard (Sec. 51A-4.213(3)): by right in CS and IM with RAR required; it "must be surrounded by screening."
- Freight terminal (Sec. 51A-4.213(4)): by right in CS, industrial and central area districts, with RAR required in CS and industrial districts and DIR (development impact review) in central area districts.
- Commercial motor vehicle parking (Sec. 51A-4.210(b)(8.1)): non-accessory temporary, daily or overnight parking, free or paid, for oversized vehicles primarily designed to haul cargo long distances. By right in CS, LI, IR and IM, except by SUP only within 500 feet of a residential district, measured in a straight line from the nearest lot boundary to the nearest district boundary, ignoring intervening structures or objects.
RAR means residential adjacency review (Sec. 51A-4.105). Under Sec. 51A-4.803, a use marked RAR on a lot with a residential adjacency generally needs an approved site plan before a permit; see (a)(3)-(4) for exceptions. A lot has one if it is next to, or directly across an alley or a street 64 feet wide or less from, an R, R(A), D, D(A), TH, TH(A) or CH district, or an existing or proposed building or structure on it is within 330 feet of a lot in one. Oak Lawn (PD 193) is outside the adjacency standards in (d)(2) and (f)(3).
Savannah, Georgia (I-L, I-H)
In the use table (Sec. 5.4), L means permitted but possibly subject to cross-referenced Article 8 standards, S needs Mayor and Aldermen approval (Sec. 3.10), and a blank cell means not permitted (Sec. 5.3.2).
- Outdoor Storage Yard: limited use in I-L and I-H only, subject to Sec. 8.5.2 height limits (12 feet next to a residential district or conforming residential use, 20 feet next to a nonresidential, nonindustrial district, the district maximum next to industrial-zoned property) and Sec. 9.7.
- Container Storage Yard: limited use in I-L and I-H only, subject to Sec. 8.5.1: containers at least 30 feet from any property line, no container or chassis storage within 350 feet of a boundary adjacent to a residential district or 50 feet of one adjacent to a nonresidential district, and stacking only under an approved stacking plan (wind load, maximum 1:2 slope).
- Site rules: Sec. 9.7 (September 25, 2025 version) governs principal-use outdoor storage, including storage on more than 30% of the disturbed or improved area of a site with another principal use, unless it meets the Sec. 8.7.12 display rules. It requires a site development plan and, unless a greater buffer applies, a fully opaque fence at least 8 feet high, plus a Type A buffer with that fence for storage along a public street, unless a stricter street-yard buffer applies. Check Sec. 9.7.4 for siting limits in setbacks, buffers, wetlands, easements, rights-of-way and circulation areas. In floodplains, bulk, toxic and hazardous materials are prohibited. Other materials need City Manager or designee approval and must meet stormwater rules.
Vehicle and freight terminal, defined to include "trucking facilities, including transfer and storage" (Sec. 13.2), is permitted by right in IL-T, I-L and I-H and a special use in IL-R. For the IL-R special use, Sec. 8.6.4 sets standards for new terminals and expansions, subject to approval terms. They include 7 a.m. to 6 p.m. hours, a Type B perimeter buffer unless a larger one applies, 25-foot pole lights and traffic analysis for sites over 2.5 acres. Sec. 5.17.9 adds access rules in IL-R and IL-T and outdoor-storage limits in IL-R.
Houston, Texas: no citywide zoning
Houston's official zoning letter, dated January 6, 2026, says the city "does not have a city-wide comprehensive zoning ordinance." It notes land use rules around its airports (Chapter 9) and in TIRZ No. 1 (St. George Place), points to the Code of Ordinances for other development regulations, and "does not address any separately filed restrictions." Plats must meet Chapter 42, and site plans are checked for parking, landscaping, setbacks and access (planning department). Recorded deed restrictions can also limit use; the city is authorized to enforce certain subdivision restrictions by suit for injunction (Legal Department).
How to check if a parcel's zoning allows outdoor storage
- Find the parcel and its district on the local zoning map by street address or assessor's parcel number (APN). Note any overlay or planned development and read its rules.
- Open the current code, not a listing or a summary.
- Search every name the use might carry: outdoor storage, storage yard, contractor's yard, freight or truck terminal, commercial vehicle parking, vehicle or container storage. Read each definition.
- Read the symbol and the key: permitted, limited, conditional or special use, or not listed.
- Read the conditions the table points to: screening, setbacks, stacking height, surfacing, site plan review and size triggers.
- Measure each distance from the starting point the code names: a storage area, lot line, building or district boundary. Note which districts trigger it.
- Check recent council and planning agendas for moratoria and pending amendments.
- For an existing yard, confirm it is permitted or legally nonconforming, and read the nonconformities rules. Dallas required nonconforming open storage to meet its screening and stacking rules before September 22, 2018 (Sec. 51A-4.213(9)(H)(iv)); if a yard relied on an extension, get the board of adjustment's written decision.
- Get it in writing. Ask the planning department for a zoning verification letter that names the exact use, the district and any approval still needed.
Where cities are restricting outdoor storage and truck yards
Colliers (August 2024) says municipalities "are increasingly hesitant to approve new IOS uses." Two California examples:
- Los Angeles, Wilmington-Harbor City. Ordinance No. 188287, adopted as amended June 25, 2024 and effective July 1 (council file 24-0555), added LAMC Sec. 12.22 A.36. It bars permits and certificates of occupancy for new or expanded trucking-related primary uses, such as truck parking and storage, trucking terminals and yards, in a defined project area that excludes two industrial areas, east of Alameda Street and the Wilmington Industrial Park. Large-vehicle EV charging is excepted only if it meets the ordinance's standards, including its 200-foot exclusion around defined sensitive uses and residentially or agriculturally zoned parcels. Section 2 exempts projects that received hardship relief under Ordinance No. 187,552 before July 1, 2024. Ordinance 188287 expires when a comprehensive plan update or another zoning amendment regulating these uses there takes effect. Council adopted the plan update in September 2025 and requested revised implementing ordinances in October 2026 (Council File 25-0774).
- Rialto. Interim Urgency Ordinance No. 1674, adopted December 13, 2022 for an initial 45 days, barred new or expanded outdoor storage uses for trailer and truck yards "except as otherwise provided by law" (January 13, 2023 report). The city's legislative record shows an item adopted January 24, 2023 extending it to December 9, 2024 through Interim Ordinance No. 1678.
Site checklist for an IOS yard
- Usable acres. For a first estimate, map the areas unavailable for storage: setbacks, buffers, landscaping, any detention pond and truck circulation. Count overlaps once, then check the result against the survey and site rules.
- Truck access. Trace the route from the highway to the gate and find who issues the driveway permit; see industrial site truck access and road frontage vs legal access.
- Surface. Gravel can count as impervious: Athens-Clarke County, Georgia, answers yes for its stormwater program, saying compacted gravel sheds water "much like a paved surface." Codes differ; see impervious surface limits.
- Stormwater permit. Under 40 CFR 122.26(b)(14)(viii), for listed transportation facilities, including SIC 42 motor freight (except 4221-25), with vehicle maintenance shops, equipment cleaning or airport deicing, only stormwater from the portions doing that work (maintenance includes fueling and lubrication) is associated with industrial activity, unless another listed category applies. Section 122.26(g) sets a conditional "no exposure" exclusion, certified for the whole facility. For regulated discharges, ask the state permitting agency or EPA about an individual permit or available general permit coverage. EPA's 2021 Multi-Sector General Permit, used where EPA issues permits, is administratively continued only for operators covered before its February 28, 2026 expiration; others should read EPA's guidance.
- Flood and wetlands. Check the FEMA flood map and the National Wetlands Inventory, then the local rules for storage in those areas.
- Environmental history. For a past truck or equipment yard, see what a Phase 1 environmental site assessment covers.
- Power and lighting. Ask the utility what service exists and what an upgrade would take. Northmarq notes that "many IOS locations lack sufficient electrical capacity to support EV charging for commercial truck fleets."
How developers and investors find and screen IOS sites
Find candidates. Start from districts that allow the yard use, near the population centers, ports and intermodal infrastructure Hamilton Lane names. On the assessor record, look for industrial parcels with little building area for their land and owners who have held a long time; see our guides to finding off-market development land, finding out who owns a property and light industrial zoning. Pillar shows available parcel zoning facts, acreage and FEMA flood zones to narrow a list before you read the code (Pillar for industrial teams).
Before an offer, confirm:
- Zoning. The verification letter from step 9, plus any SUP, planned development or site plan approval still needed.
- Survey. An ALTA/NSPS survey maps boundaries, plottable easements and observed potential encroachments. Optional Table A items 6(a) and 6(b) use parcel-specific zoning information you or your representative provide in a report or letter. Under 6(b), surveyors plot setbacks that need no interpretation.
- Title. The title commitment's exceptions can list recorded deed restrictions and easements; review them alongside the city's rules.
- Time. A feasibility period long enough for any hearing; see the land feasibility study checklist.
Quick answers
How big is an IOS site? Typically 2 to 10 acres, per Hamilton Lane. Colliers says infill sites may be 0.5 to 3 acres and outlying "mega-developments" 50 acres or more.
Is a truck yard the same as IOS? It is one kind of IOS. Chicago, Dallas and Savannah use names like freight terminal or vehicle storage.
What zoning do you need for a truck yard? It depends on the local code. Dallas, for example, allows commercial motor vehicle parking by right in CS, LI, IR and IM, with an SUP required within 500 feet of a residential district. Measure directly between the nearest lot and district boundaries (Sec. 51A-4.210(b)(8.1)).
Can light industrial land be used for outdoor storage? Sometimes, with conditions. Chicago permits a contractor/construction storage yard in M2 Light Industry, subject to the code's other standards (Sec. 17-5-0207). Savannah lists an outdoor storage yard as a limited use in Light Industrial (I-L), subject to Secs. 8.5.2 and 9.7.
Does Houston have zoning? Not citywide, per its January 2026 letter. Airport-area and TIRZ No. 1 rules, Chapter 42 and other ordinances apply, and recorded deed restrictions can limit use.